Autool Launch CNC-602A Fuel Injection System Cleaning Tools CNC602A Injector Cleaner and Tester with 110V Transformer

Function:
* Ultrasonic cleaning:
To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test:
To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
* Leakage test:
To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test:
To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test:
To test injectors by simulating different working conditions.
* On-vehicle cleaning:
The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Specification:
* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm
* Weight: About 35kg
Launch CNC-602A injector &cleaner tester package list:
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 BUICK injector adaptor
11 199010019 Injector testing liquid (pick out)
12 307030024 Injecter detergent (pick out)

• Input voltage is 220V, we will provide 220V to 110V Transformer free,so it can fit for USA,pease do not worry.
• We will not provide the Cleaning Fluid and Testing Liquid in the package,because of custom policy. You will find them in local market.
• This machine was for six-cylinder car.Block 2 tube for 4 jar. if you need clean machine for eight-cylinder car,please contact us.
• Item fit for two kinds of injectors. Top feed injector accessories were standard configure. Side feed injector accessories for option. Please contact us if you want to side feed accessories. Support no dismantle clean car fuel system. The machine fit for most of petrol injector(come with lots of adapters), but not for diesel injector.
• Support Model: Audi,Australia Ford,Benz,BMW,Brilliance,Chevrolet,Chevy,Chrysler,Citroen, Dacia,Dadi,Daewoo,Daihatsu,Demo,Fiat,Ford,GM,Holden, Honda,Hyundai,Isuzu,Jaguar,Kia,Lancia,Land Rover,Mahindra,Maruti,Mazda,Mitsubish,Nissan,Opel, Peugeot,Porsche,Renault,Romeo,Rover,Saab,Seat,Skoda, Smart,Subaru,Suzuki,Tata,Toyota,Volvo,VW,Yamaha