Quickbuying 110V 100W 40K Ultrasonic Cleaner Power Driver Board+1PCS 60W 40K Transducer For Ultrasonic Cleaning Machines Integrated Circuit

Specifications
Power requirements: AC110V (-15 ~ + 10%), 50Hz,100w
Sensor: 60w
Ambient temperature: -10 ? ~ 40 ?
Humidity: 35% to 85%
Transducer frequency: 40KHz
Size: 9.8×9.3cm
Suitable For: Ultrasonic cleaning machines

Features
– Power tube: import power tube;
– PCB: double-sided two ounces;
– Stable performance;
– Large radiator, cooling fast

Shock head circuit board (ceramic transducer) Wiring instructions:
1. The board can not load electricity;
2. No cleaning solution can not be energized cleaning;
3. Shock first two tabs, two ceramic middle lug is positive, by the upper and lower metal column is negative,
can not be reversed;
4. Transducer film on the ceramic sheet covered with a silver layer for the negative side, the other side of a
large two silver layer is positive, the smaller one for the negative plate, welding power cord must be welded
to the side of the silver layer has two , the other side of the vibration surface can be pasted (this is available
with a ceramic patch transducer assembly instructions) in a bidet; a silver layer ceramic chip is not high
temperature, when the welding power line iron temperature should not exceed 280 degrees, most good use
heated iron, the iron temperature is set to 250 degrees.
5. Shock head larger side (with screw holes) to vibrate surface can be glued to the pelvic floor cleaning,
washing pots must be well grounded;
6. Shock head or transducer ceramic glue application head shock stick firmly to the pelvic floor cleaning;
7. Two shock head and coupled to the circuit board terminal, a circuit board with up to two shock head,
but also with supporting the use of a shock head;
8. Circuit board wiring diagram is as follows:
Positive and negative, respectively positive and negative output coupled with the shock of the child, can
not pick the wrong, we have qu

• High Quality board circuit