ELEGOO 1.5L(0.4Gal) Ultrasonic Cleaner with Digital Timer, Heater and Degas Function for Cleaning Jewelry, 3D Printed Object, Circuit Board, Industrial Commercial Ultrasound Cleaning Machine(110)

Specifications:
Model: 010T
Ultrasonic Power: 60W
Heating Power: 100W
Transducers: 1
Capacity: 1.5L
Tank Size: 150 x 135 x 100 MM
Units Size: 175 x 160 x 210 MM
Net Weight: 2.3Kg
Timer: 0-60min,7 cycles adjustable:180S/300S/600S/900S/30M/60M/60S
Heater: heater will automatically off when temperature up to 65’C
Transducers: BLT(BOLTED LANGEVIN TRANSDUCER)
Frequency: 40KHz
Power supply: AC100V~120V,50/60Hz;AC 220~240V,50/60Hz
Tank material: SUS304 Stainless Steel
Basket: optional

Application:
Electronic factory,Car work shops,Industrial and mining area,Laboratories,Watch shop,Optical shops,Jewelry shops,Mobile phone repair shops,and household use.

Catutions:
1.Ensure the power supply is in rated range before power cable is connected.Refitting is strictly prohibited!Attention that the control panel will be eroded by organic solution,strong acid and strong alkali.
2.Ensure the earth wiring is well connected before starting.
3.Ensure the power key or knob is on the’OFF’place before starting.
4.Do not operate if the tank is empty,or ultrasonic generator will be damaged.If heating is needed,the water level shouldn’t be less than 2/3.
5.Please close the lid to reduce noise and pay attention to water and steam in case of burning skin while open the lid.
6.Do not relocate the machine when fluid in the tank in case of overflow.
7.Please use water-soluble liquid for bentchtop ultrasonic cleaners.Strong acid or flammable liquid is forbidden.
8. Shorten the daily working time.Please stop a few minutes for heat dissipationi after working over 30 minutes.
9. Heater is forbidden when using flammable liquid(such as alcohol,solvent cleaner etc.) to clean objects.
10.Cleaning effect will be much better if using the machine together with proper solvent.

• Industrial grade 60 Watt ultrasonic transducer provides a stronger cavitation effect and improved cleaning results. Sturdy build quality with 1.1 mm thick SUS304 anti-corrosion stainless steel tank which has 1.5liter(0.4Gallon) volume and comes with a basket so you can keep your jewelry, glasses, watches, razors, contact lenses, or 3D printed models in place.
• Dual fuse protection offers you safer user experience, but turning on/off the cleaner frequently is NOT recommended. On the bottom, it has four antiskid rubber pads to make sure stability while it’s working without leaving any water stains.
• Digital display and mechanical button make it very convenient to operate the cleaner and has more accurate timing control. High-temp protection will automatically turn off the heating function when the temperature is higher than 65°C or 149°F. The recommended temperature is 68-140°F.
• Degas function eliminates oxygen in the liquid and has enhanced cleaning results; meanwhile, it prevents cleaned objects from oxidation. Seven cleaning periods available to accommodate users’ different needs.
• Well-Protected Package: the ultrasonic cleaner is wrapped in a transparent tape and covered with double layers of shockproof foam, keeping it from damage during transportation.