iSonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 110V. with Label Protectors, Cleaning Solution Concentrate, Kimwipe Lab Grade Tissue
ISonic P4875II+MVR Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. It comes with motorized fixtures designed to hold five 12″ or 10″ vinyl records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kim wipe nonfiberous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed. Label protectors with o-ring seals protect the label areas while cleaning. The cleaning solution is a super concentrate. Use 2 cap-fuls for a full tank of water. The ultrasonic cleaner equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for best efficiency. This unit has unmatched cleaning power. Full range 30-min. timer with quick set: 10, 15, 20, 25, 30 and 5 minutes, and reducing button for every minute in between. Drainage valve makes it easy to discharge water. Hose is supplied. Heater with 5 settings: 104 to 140 °F or 40 to 60 °C. Thermometer to show approximate actual temperature ranges. Do not use heater for vinyl records. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.
- ISonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. Hold five 12″ to 10″ vinyl records, rotates at 5RPM, with label protectors that seal the label area against water
- Stainless steel tank, tank size 13″x9.4″X4.1″. ultrasonic frequency 35, 000 hz, 110V 380W, heaters
- One 8-oz bottle of cleaning solution concentrate. One box of kimwipe non fibrous tissue for drying the records
- Full range 30-minute timer, can be adjusted to any minute between 1 to 30 min. 3 industrial grade stack transducers with individual control pcb for unmatched cleaning power
- Heater with 5 settings: 104 to 140°f or 40 to 60°c. Do not use heater for vinyl records. Thermometer. Drain
- Fixture can be either mounted on the left or the right, for right handed or left handed
- Flexible with either 12″ or 10″ or mix and match
- Label protectors seal off label areas
